Sennenkyu Taiyo 24

A handy one-touch moxibustion plaster which eliminates the need for external heat sources.
Heat is generated through oxidization of refined, powdered iron. The heat generated through oxidation vaporizes a special ingredient at the bottom of the moxa sheet, which then permeates the skin's pore, providing the healing effects of moxibustion for an extended period of time.

* Self-heating - No external sources of heat are necessary.
* Safe heat treatment - No burning fire or smoke.
* Self-adhesive
* Disposable and environmentally safe
* An average temperature of 40 degree C (104F) warmth for approximate 30 minutes
* Box of 24 pcs.

How to Use Sennenkyu Taiyo
1) Open the package just before use.
2) Peel the air blocking seal off of the top. Heat will be generated and will reach the proper temperature (about 40 to 45 degree C) in about 20 to 30 minutes.
3) Peel the seal off the bottom part (skin contact surface).
4) Firmly apply the moxibustion to the predetermined TSUBO (Acupuncture Point) application site. The warm temperature (about 40 to 45 degree C) will last about 3 hours.
5) Remove the burned moxa after it cools down. Leaving it on the skin may cause irritation.

Points of CAUTION:
* This device are not designed to be used with any fire/flame.
* Moxibustion may cause blisters and leave marks on the skin
* Remove the self-heating moxa immediately when intense heat is felt on the skin.
* Be careful in applying moxibustion to delicate areas of the skin (particularly the abdomen).
* Discard the used self-heating moxa as a nonflammable after confirming complete cool down.
* The self-heating moxa cannot be preserved after the package is opened. When it starts generating heat it cannot be used again after it is left for more than the set heating time.